Raise your Raised Stencilling with Posh Chalk

Stencilling is in, it’s all over at the moment, from stencil art to furniture upcycling and interior decor, luckily there is a range of Posh Chalk stencils available to slake your thirst for stencilling! I had a play about with the Posh Chalk pastes (the perfect complimentary product to the stencils) along with the stencils and created a quick, simple but very pretty stencil design.

Like the rest of the Posh Chalk stencils, the WoodUmandala is ultra-durable, heat resistant and – importantly – thicker than most on the market. As the stencils are thick, it makes them perfect for raised stencilling! I like the intricate design of the mandala though, so that’s where we started.

Sometimes when we’re embarking on projects we plan, we map out colours, we know just what we’re doing and we have an end in mind. Sometimes, it’s just fun to play around and see what we come up with, this is exactly what I did with this stencilling extravaganza!

Have you got an old bit of chip board laying about? Don’t throw them out, they’re perfect for spicing up with stencilling, the messy, almost rustic look of the chip board goes perfectly with the pretty lines of the stencil and gives you a real hearty finish. (I’m sure there’s a better phrase out there, but it’s well past lunch time and i’m hungry – we’re sticking with hearty).

I’ve seen people use tape to secure their stencil, and this is fine, I often do this myself. I do, however, incorporate it with a spray mount. Some lightly tacky sprayable adhesive like 3M spray mount works wonders, it will stick to your surface, so won’t move and ruin your stencilling, but it won’t pull off any paint which it is stuck to. It’s easy to use, spray the back of your stencil, wait a few minutes and press it onto which ever surface you’re stencilling on…like chip board!

If you’re using the Posh Chalk Pastes, and I recommend you do, when raised stencilling, it’s important to make sure you’re pushing the paste through the stencil. It sounds obvious, but too much of a light touch on the stencil means that when you pull it away, you’ll be left with an incomplete pattern. A big bonus in using these pastes is that they’re an all-in-one product, so no need for sealing afterwards.

I chose the Black Carbon Smooth Metallic Paste and the Pearl White Textured Paste for this particular design. I wanted some classic colours which would also blend well together, it doesn’t get much more classic than black and white. Plus, the Textured Pastes have Swarovski Crystals in them which would give a textured element to my raised stencilling.

Pearl white paste being spread on the centre of the mandala stencil onto a chipboard underneath.
I wanted the black around the outside giving away to the white textured paste in the middle and a graduated blend in between – giving it a smokey look before highlighting the textured paste in the middle.
Squeegee time! When raised stencilling, there’s an abundance of tools you can use from palette knives to right through to credit cards (just not the one you use to buy your stencilling supplies with). This time around, I used a silicone ‘brush’. It’s really great for applying the Posh Chalk pastes and gives you great control when working with the smaller stencils.

The pastes are really thick and stand up great to being pushed through your stencil in the pursuit of that perfect raised stencilling design; what is often overlooked is that they can be mixed, blended if you will, in situ. This means that you can really begin to play with a whole array of colours at the same time as stencilling. What a time saver!

Black and white paste on a stencil prior to the reveal
You want to push the paste through and lay it on thick enough so you get the defined edges we’re looking for when raised stencilling. This is a bit of a feeling out process though and too much paste looks messy, it’s a bit of a Goldilocks affair. It comes with practice, once you’ve found that sweet spot you’ll know, you should just about to be able to see the pattern of the stencil underneath your paste.

Then…

Whip it off! Everybody loves a good stencil reveal, but let me tell you, when you’re doing it yourself and it looks great, you get a great sense of accomplishment.

Now we could stop there, normally with raised stencilling you would. However, we’re working with Posh Chalk here so the party doesn’t have to be over if you don’t want it to be. If you’ve got a heat gun handy, then you can get to work.

If you heat the pastes with a heat gun, they will puff up or ‘pop’ creating a textured 3D effect, perfect for adding the extra little bit to your project. Give it a go and raise your raised stencilling!
black and white raised stencilling with the glow of a heat gun show as it is being 'popped'
What you can’t get a feel for in this short blog is the relaxing sound the stencilling process makes, you know where you can though? YouTube! Watch our video of this design coming

together. https://www.youtube.com/watch?v=Y6Cxgpg4EIc

PostUshare:

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on email

Über WoodUbend

Die Geschichte begann 2018 als Gründerin Solly Jo einen neuen Herstellungsprozess mit Holzstaub entdeckte. Durch das Erhitzen biegbare Formstücke fürs Basteln, Upcycling, Konstruktion und Innenarchitektur.

Kontaktieren Sie uns

Furniture Revivals

Schliereggstrasse 3,

Wädenswil 8820,

Switzerland

Phone: +41 79 785 0986

© Copyright 2021 – WoodUbend